This machine is used for flax tops making process. It is used for doubling, carding and drafting the flax tops so that impurities and neps can be removed, also staple fiber can be separated out.

1. Feeding type
Cans feeding. Cans specification: Φ700*1000mm. Flax slivers are fed through guide rollers, pressing rollers and then to the table-board, which makes slivers arranged in order, to avoid unexpected drafting, and form even thickness tuft. Then tuft can be fed into the feeding box according required length.

2. Carding mechanism
Carding mechanism consists of feeding box, material supporting plate, nipper, bundling device, circular comb and top comb, etc.

Feeding box is equipped with nine rows of round pin strips, among which are two rows of 5 pins/10mm, three rows of 6 pins/10mm, four rows of 7 pins/10mm pin strips.

The needle-occupied area of the circular comb accounts for 202 degrees of the whole circumference. 6 SAW-tooth metal needle strips of different needle densities are intalled in the front part while 5 SAW-tooth metal needle strips of different needle densities are intalled in in rear part. Needle strips with various needle densities could be adjusted base on different fibers and varieties.